Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Nfiniti Wireless-N High Power Router & Access Point
At a glance
ProductBuffalo Technology Nfiniti Wireless-N High Power Router & Access Point (WZR-HP-G300NH)   [Website]
SummarySingle-band draft 802.11n router with Gigabit WAN and LAN ports and higher transmit power than other products with USB storage sharing
Pros• Gigabit WAN and LAN with fast routing
• Higher power than other draft 11n routers
• Multiple SSIDs with individual security settings
• Secure browser-based remote access
• Full-featured USB NAS w/ BitTorrent download
Cons• No VLAN-separated wireless Guest Zone
• No transmit power adjust

Typical Price: $69  Buy From Amazon

Typical Price: $69 Buy Direct

Introduction

Wireless products from Buffalo Technology had all but disappeared from the market in the US due to a suit from an Australian company named CSRIO (Commonwealth Scientific Research and Industrial Organization).  But in December of 2008, a federal judge stayed the permanent injunction that prohibited Buffalo from selling wireless products in the United States.  More recently, in July 2009, Buffalo announced a settlement to the patent infringement suit.  With their legal problems behind them, Buffalo is now back in the U.S. market with several new “NFiniti” draft-N products as well as their legacy Wireless-G High Power Router and Access Point (WHR-HP-G54). 

This review focuses on the of Buffalo's U.S. wireless line, the single band draft 802.11n Nfiniti Wireless-N High Power Router & Access Point (WZR-HP-G300NH).  While the WZR-HP-G300NH has a list price of $119.99, almost double that of its less powerful $69.99 WHR-G300N draft-N sibling, it has a few additional features that could well justify the premium price.  Figure 1 shows Buffalo’s comparison of their single-band wireless offerings.

Buffalo wireless product comparison chart

Figure 1: Buffalo wireless product comparison chart

Product Tour

The case on the WZR-HP is designed to sit either vertically with the use of an included snap-on plastic base, or horizontally.  You could also mount it to a wall using the supplied mounting screws.  The black glossy case is stylish looking, but is also prone to fingerprint smudges. 

Sprouting from the top of the case are two moveable wireless antennas.  Frankly, rotating them probably won’t change the performance much – the WZR-HP already has great coverage due, in part, to its high power output.  Figure 2 shows the front panel with all of the LED indicators illuminated.

Front view of the WZR-HP

Figure 2: Front view of the WZR-HP

Above the column of indicator LEDs, there’s a push button switch to initiate Buffalo’s proprietary AOSS (AirStation One-Touch Secure System) or WPS (Wi-Fi Protected Setup) wireless security.  If your client adapter doesn't support AOSS or the WPS push-button method, the router also supports the WPS PIN method.

The LEDs include:

  • Power (green power symbol)
  • Security (lock symbol – illuminated when wireless security has been enabled)
  • Wireless (blinks when there is wireless activity)
  • Router mode (illuminated when WZR-HP is configured as a router)
  • Diagnostics (illuminated during bootup)

Below the LEDs are two additional indicators to show if the "Movie Engine" on the WZR-HP has been enabled.  When the "Movie Engine" is enabled, the QoS engine and IPV6 pass through are enabled, the wireless multicast rate is increased, and TCP Rwin is limited for "an improved multimedia experience", according to Buffalo. I didn't test these claims.  Labels for each of the LEDs are on the adjacent side as shown in the opening photo.

Figure 3 shows the rear panel of the WZR-HP.  The Internet or “WAN” port is color coded blue.  All ports, including the WAN port, support Gigabit Ethernet, and each port has a link/activity indicator.  There’s a single USB port that you can use to attach a single USB drive to turn the WZR-HP into a simple NAS for sharing files on your network.  You can’t, however, connect a USB hub to this port, nor can it be used for print sharing. 

Adjacent to the USB port, there’s a switch for dismounting an attached USB drive.  At the extreme right in the photo, there’s a three position switch that controls the operating mode of the WZR.  You can select on (Router), off (Access Point) or Auto.  In the default Auto mode, the WZR-HP operates as a router.  If it detects another router on the network, it switches to AP mode.

WZR-HP rear panel

Figure 3: WZR-HP rear panel

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, I have an AImesh system with 2 RT-AC68U connected with cable, the first in my house the second in garage/garden. I have about 50 wifi devices conn...
Hi guys,I tried to check more info about the region selection (also in this forum), looking at the real differences in terms of power limitation and c...
I'm wondering whether this is possible to do on the AC86U router. I'm thinking about setting up a RPi that will run a proxy server with a Wireguard VP...
I have several 2.4 Ghz smart devices connected to my RT-AC86U router currently running Merlin 384.15 firmware. As repeatedly advised, I have these dev...
I need a fast vpn router for online gaming and streaming from target.

Don't Miss These

  • 1
  • 2
  • 3