Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless How To

Introduction

This article has been superceeded by How to Crack WEP...Reloaded.

Hundreds, perhaps thousands of articles have been written about the vulnerability of WEP (W ired E quivalent P rivacy), but how many people can actually break WEP encryption? Beginners to WEP cracking have often been frustrated by the many wireless cards available and their distribution-specific commands. And things are further complicated when the beginner is not familiar with Linux.

In this three part series, we will give you a step by step approach to breaking a WEP key. The approach taken will be to standardize as many variables as possible so that you can concentrate on the mechanics of WEP cracking without being hindered by hardware and software bugs. The entire attack is done with publicly available software and doesn't require special hardware - just a few laptops and wireless cards.

Gotcha!

Figure 1: Gotcha!

This first article will help you set up your wireless lab and guide you through the scanning portion of WEP cracking. After all, you will need to find and document the wireless networks before you can crack them. The second article will describe the stimulation of the target WLAN to generate traffic and the actual process of capturing data and cracking the WEP key. After reading these two articles, you should be able to break WEP keys in a matter of minutes. A third article will turn things around and describe how to defend against multiple skill levels of wireless intruders

NOTE!NOTES:

  • A description of the basic approach and techniques used in this How To can be found in The Feds can own your WLAN too.

  • You don't need to be a networking expert to successfully follow this How To, but you need basic familiarity with networking terminology and principles. You should know how to ping, open a Windows Command Prompt, enter command lines and know your way around the Windows networking properties screens.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I'm exchanging my old all-in-one R7000 for a better setup and am wondering if my choice of components is OK or if I made some obvious mistake. I...
HelloI have a problem with mi UPnP Media Server on Asus RT-AC58U.I enabled my server and I can see the drive connected through USB port to my router b...
My older Dlink DNS-323 in Raid 1 (2 WD 1.5tb drives) just seems slow these days, and it has always had pretty poor transfer speeds. So time to think a...
Time scheduling does not work anymore for some clients, however, it still works for others. It had been working fine for quite some time before that.T...
Anybody using HomeKit Secure Video? I want to buy a camera and try it as I have HomeKit running on my AppleTV 4K. My wife already has an iCloud storag...

Don't Miss These

  • 1
  • 2
  • 3