Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Introduction

Updated 4/17/2012: Marvell processor identified

With the introduction and first review out of the way, I thought I'd take a look inside the rest of Cisco's new routers. To recap, Cisco has pared its consumer router line down to the six products shown below. The E series to the left are the lower end of the line and lack the cloud-connected features of the higher-end EA series on the right. Let's jump right in.

2012 Cisco Linksys Router Lineup

2012 Cisco Linksys Router Lineup

E900 / E1200

The E900 is now Cisco's entry-level Linksys router. The FCC photos reveal that its innards are the same as the E1200, which has been bumped to V2. The difference between the E900 and E1200 is only firmware. The E900 does not support Guest Access or the Parental control features, while the E1200 does. Note the bump in flash size to 8 MB from 4.

  E900 / E1200 v2 E1200 v1
CPU Broadcom BCM5357 Intensi-fi XLR 802.11n Router Solution Broadcom BCM5357 Intensi-fi XLR 802.11n Router Solution
Switch 10/100 In BCM5357 10/100 In BCM5357
RAM 32 MB 32 MB
Flash 8 MB 4 MB
2.4 GHz Radio In BCM5357 In BCM5357
5 GHz radio N/A N/A
Table 1: Cisco Linksys E900, E1200v1, E1200v2 component summary

Here's a shot of the E900 / E1200v2 inside. Note that one antenna is a case-mounted bent-metal, while the other is etched into the board.

Linksys E900 / E1200 v2 inside

Linksys E900 / E1200 v2 inside

Here is a close up of the key components. Those are not amplifiers inside the shield area above the BCM5357; they are just transmit/receive switches.

Linksys E900 / E1200 v2 board detail

Linksys E900 / E1200 v2 board detail

And a photo of the E1200 v1 for reference. The redesign looks like its primary focus was cost reduction, which is appropriate for a $50 MSRP (for the E900).

Linksys E1200 v1 board detail

Linksys E1200 v1 board detail

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, I have an AImesh system with 2 RT-AC68U connected with cable, the first in my house the second in garage/garden. I have about 50 wifi devices conn...
Hi guys,I tried to check more info about the region selection (also in this forum), looking at the real differences in terms of power limitation and c...
I'm wondering whether this is possible to do on the AC86U router. I'm thinking about setting up a RPi that will run a proxy server with a Wireguard VP...
I have several 2.4 Ghz smart devices connected to my RT-AC86U router currently running Merlin 384.15 firmware. As repeatedly advised, I have these dev...
I need a fast vpn router for online gaming and streaming from target.

Don't Miss These

  • 1
  • 2
  • 3