Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Final Thoughts

I was very surprised when I discovered that a USB cable is the charging mechanism for the battery in the conference phone. It's a decision that appears to be more driven by cost than function. Why require people to connect to the computer when the whole idea is in enabling the ClearSky Conference Phone to be un-tethered to the computer running Skype? Wouldn't it be better to include a USB charger?

But at least the Phone Kit has several operating modes that address the battery issues. In Normal Mode, if it is disconnected from power, the conference phone shuts down completely after 6 minutes of inactivity. In that situation, you would essentially be making outbound calls. The Standby Mode puts the conference phone to sleep after 6 minutes of inactivity, but the phone will “wake up” on an incoming call.

In my tests of Standby Mode, an incoming call did wake it up, but there was a slight pause as the phone powered up. Monitoring my notebook, I noted that the conference phone didn't ring until about the third incoming ring. But even though Standby Mode does extend the its life, the battery will still require periodic recharging; probably in the middle of an important call.

I also wondered, how useful is an un-tethered Skype conference phone? Though there are some cases where you would use an un-tethered phone, at least for me, I would have found the phone more useful if it had a color screen, connected directly with a USB cable to my Skype notebook, and interfaced with a POTS / PSTN line. That last "nice-to-have" would make it a really useful office tool. But, that's a different product...

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

11ax is supposed to address the problem of density.Does 11ax router really help if you have a whole house full of 11n 2.4ghz IoT devices?Personal expe...
Greetings.My log file is getting bombarded with successful Dropbear messages, everytime Home Assistant is checking on things (ssh is only open to LAN....
Hi All,Just a quick one. I have successfully installed the Voxel firmware for my R9000 using expressVPN.Everything actually seems to be working VPN wi...
My RT-AC68P has two USB ports, one each 2.0 and 3.0. I have two flash drives, one USB 3.0 and the other not 3.0. If I plug the 3.0 drive into the 2.0 ...
i have an rt ac68u merlin firmware running a client vpn connected to a pay vpn service so all my devices are behind.On the router runs an openvpn serv...

Don't Miss These

  • 1
  • 2
  • 3