Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Motion Detection and Low Light Operation

To me, the most interesting option was the motion detection feature. I don't want to sit and watch my camera all the time, but instead would like it to notify me when someone or something approaches my home. The camera lets you enter an email address and when "motion" is detected in front of the camera, a picture of what caused the motion is emailed to you.

By default this option is turned off, so I configured it, turned it on, and waved my hand in front of the camera. A bit later, I received an email with a picture of a blurry hand. Neat. But when I went back to check the web interface, I found the camera locked up and unresponsive. Oops. I debugged this problem for a while before I emailed a helpful contact at Hawking who eventually got me an updated firmware image that no longer locked up when motion was detected.

But even though it no longer locked up, I still found the feature to be finicky. When I tried to force a motion event by walking in front of the camera, sometimes I'd get nothing, other times I would. When I had it pointing out my front window, most times a car driving up would trigger an event, (Figure 10) but walking up the driveway often wouldn't.

Detection of car arrival

Figure 10: Detection of car arrival

There were no options for sensitivity in motion detection. I could set the number of frames to email and the time to wait between events, but there was nothing to specify how much motion should be considered relevant. Another issue I had with this feature was garbled images (Figure 11). Approximately one out of twenty images would arrive in my mailbox corrupted as if it were sent before it was completely constructed on the camera.

Garbled Image

Figure 11: Garbled Image

To take a different approach to the motion detection problem, I tried out another feature of the camera. The HNC290G has the ability to serve up a single JPEG image from the camera using a pre-defined URL. So with a bit of scripting, wget to fetch images and ImageMagick to time-stamp and compare them, I had a poor-man's change detection system. 

This cobbled-together solution worked more reliably than the built-in motion detection feature. But it required a PC to do the real work and kept my network busy fetching a new image every second. Figure 12 is an example showing that it was able to detect me walking up the driveway.

Home-Brew motion detection

Figure 12: Home-Brew motion detection

Note that the quality of the image in 320/240 mode is such that you'd probably not be able to identify an unknown person. I found that the script running under Ubuntu Linux on my 2 GHz Core Duo could easily process fetch and process an image a second. But the same script running on my NSLU2 could only process an image every 25 seconds or so. And even then, it often ran out of memory and failed.

And speaking of failure, I also found that the whole process was moot after 15-20 minutes because the HNC290G would start returning the same image every time until the power was cycled. The web interface would be showing the correct video, but the still-image feature would be stuck in time.

The last test I wanted to run with the camera was usage in low light conditions. The HNC290G isn't designed or advertised to work in low-light, but if it were to meet my home security needs, It would need to work at night with only my outside lighting. In general, I found it worked better than expected when lighting was poor. Figure 13 shows my wife arriving home in the evening, just after sunset. You can see that it was dark enough out that the car headlights are on, but the camera still was able to pick her up.

Twilight motion detection

Figure 13: Twilight motion detection

Figure 14 shows me walking up the driveway much later in the evening when there was little natural light. I was holding a small flashlight to simulate a flame that an arsonist might be carrying. The built-in motion detection feature of the camera captured both of these pictures automatically so when it does work, it handles low-light fairly well.

Night time motion detection

Figure 14: Night time motion detection
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello allI will buy a AC87U brand new in box and I would like to install Asuswrt-Merlin but I saw that in installation wiki :"Starting with Asus's 3.0...
I am trying to set up basic data access at my cottage during the winter months when I am not there often so I can monitor the place (temp, motion dete...
i have found a bug that is interesting. ill post a screen here. all my devices are in qos upload just fine but my phone. i was doing a sms backup and ...
I recently upgraded from a 68U which was rock solid, and ran scripts fairly well despite having a much slower CPU. The 68U rarely needed a restart, de...
I am looking for a 8+ port POE switch with integrated PSU.I am using 8 ports now and having one or two extra woudl be a benefit. Of course I could go ...

Don't Miss These

  • 1
  • 2
  • 3