Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Alerts, Motion Detection, Live Video

Customized alerts and motion detection areas can easily be configured. Multiple motion detection zones can be drawn on a live preview screen, and you can give each zone a name and different motion detection tolerances. An activity window in the bottom right corner also shows a real-time graph of activity. (In Figure 9, the graph is blank because the camera cleared the screen before I could run back to the laptop and do a screen capture.)

Setting up motion detection areas

Figure 9: Setting up motion detection areas
(click image to enlarge)

Different email alerts can be sent for different detection zone triggers. In the example scene above, if someone steps in front of the water cooler, an alert will be sent to one email address. But if someone steals snacks from the top shelf, a different email message is sent to a different email address. The email subject line and content can be customized in almost infinite ways.

Email alerts can be sent 24/7 or can be tailored to ignore certain time periods. For example, you may want to ignore motion during business hours, and then turn on detection after 6PM and all day on weekends. In addition to sending alerts, "snapshots" can be saved on either FTP or HTTP servers.

Axis 211A Live Webpage View - Lens on widest setting

Figure 10: Axis 211A Live Webpage View - Lens on widest setting
(click image to enlarge)

As I covered earlier, the live video feed from the camera can be easily accessed. But taking advantage of the 211A's audio features or taking frame-grab "snapshots" requires using Internet Explorer since the features use ActiveX controls.

Figure 11 is a Firefox screenshot, where you can see that the toolbar visible in the bottom of Figure 10 is missing.

Non-IE browsers have some features disabled

Figure 11: Non-IE browsers have some features disabled
(click image to enlarge)

Note that in contrast with some of its less expensive competitors, the 211A does not include a way to capture video.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an Asus RT-68U and while it covers the house great, it's not so great out toward the back yard. The house has aluminum siding (which I suspect ...
I will make try to make this quick. My setup is anRT-AC86U running latest firmware and diversion+pixelserv/skynet. Freshly installed after a fully res...
Not sure it's strickly related to FW upgrade to Merlin 384.18 on a RT-AC66U B1, but since yesterday, from the first rebood I did after Fw update, I se...
Not sure whats going on. I'm trying to enable SSH but the option is missing from the Administration > System page. I've looked all over the forums and...
I'm playing around with iperf3 to test the speed between my laptop and the R7800 (running in AP mode) and between the R7800 and the firewall (OPNsense...

Don't Miss These

  • 1
  • 2
  • 3