Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Introduction

NETGEAR Wireless Digital Media Player

NETGEAR Wireless Digital Media Player (MP115)
Summary Media player supporting music, image and video with Ethernet and 802.11b/g connectivity
Update None
Pros • Supports wide range of music & video formats
• Follows UPnpP standard
• 802.11g & Ethernet connectivity
Cons • Unexciting user interface
• Picky about supported video formats
• Personal firewalls can cause problems
• No WPA support

As my digital media library grows, I'm constantly on the lookout for the perfect little box to let me access it from my home's conventional audio / visual gear. I'd like to be show photos and digital movies on my TV, play my digital music library through my stereo and have one user interface to control it all. The box should be able to pull content from any of its locations on my network, especially my networked storage devices. Tall order? Perhaps - but I can always hope! In this review , I'm going to take a look at a device that's designed to do most of what I'm looking for - the Netgear MP115.

The MP115 is a network device that's designed to be a bridge between your entertainment center and your PC. It's equipped with both 802.11b/g and Ethernet networking capabilities for connection into your home network. Output ports are provided for connecting to your stereo and video system including RCA-style audio and composite video, S-Video, and Y/Pb/Pr component video. There is also one undocumented, and apparently unused, USB port. (Figure 1)

MP115 connectors
Figure 1: MP115 connectors

When I opened the MP115 box, it was a bit bigger than I expected. Since it has no internal hard-drive or display, I expected it to be tiny, but it was just a little smaller than a cereal box.

Unlike Netgear's MP101 music-only device, the MP115 does not have a front panel LCD display, opting instead to use its video output to a TV for its UI display. No buttons are provided on the device either - you drive the box via an infrared remote.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Running OpenVPN server on RT-AC5300 with latest merlin image.I can connect and access the LAN on the AC-5300 fine, I have another LAN segment on a swi...
I am struggling with arranging policy rules to my router to route the traffic.All source ips are 0.0.0.0and I have a list of around 90 ips that need t...
I`ve tried several methods to reconnect WAN (4G USB stick) through SSH but none of them worked. Is there a way (command) to reconnect WAN without rebo...
I have an 86U an 68U with Merlin 384.13. The 68U is setup in AP mode and is connected via ethernet to the 86U. I want to give AIMesh a try - main reas...
So i got a new Home Gateway installed as part of the 1Gbps upgrade i did with my ISP. Works like a charm, getting around 850/40 out of the 1000/40 sub...

Don't Miss These

  • 1
  • 2
  • 3