Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Nutone logoNuTone has rolled out a family of Z-Wave smart home sensors.

The Smart Home Series devices are said to all be compatible with "most" Z-Wave hubs, making them more flexible than many competitor's products that work only with same-branded hubs.

The new line includes a dimmable LED bulb, plug in outlet and dimmer modules, wall-installed outlets, dimmers and fixture controllers and garage door controller.

The Smart Z-Wave devices were created "in coordination" with Nortek Security & Control Group, which also markets products under its Linear, 2GIG and GoControl brands.

NuTone Smart Home

NuTone's Smart Z-Wave devices are all SKU'd up at Amazon at around $43 for most of the products except the Garage Door Controller, which sells for $90.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello!I'm getting a little desparate. Since I changed some things in my network environment I can't seem to get a stable WiFi connection. Following se...
I had the channel set auto for 2.4GHz on ac88U, 384.15 release.And it picked 8 as optimal which was no optimal it should be either 1 or 10/11. But whe...
Hi. I have setup Dual WAN as failover and I am using Asus DDNS on my router. When my Primary WAN is up, I can easily connect to my router remotely thr...
I have an ASUS RT-86U and i wish to install Merlins firmware onto this.The confusion is that the firmware files are usually .trx but Merlins for some ...
Can anyone tell me how to create a user script? I tried to follow the wiki here (https://github.com/RMerl/asuswrt-merlin.ng/wiki/User-scripts) but wit...

Don't Miss These

  • 1
  • 2
  • 3