Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

The DCS-6110 Fixed Dome Network Camera has a 10/100 Ethernet interface with 802.3af PoE support. A ¼” VGA Progressive CMOS image sensor is coupled to a 3.7-12mm Varifocal lens and supports a minimum light level of 1.5 Lux @ F1.4.

The camera supports simultaneous MPEG-4 and Motion JPEG (MJPEG) as well as 3GPP Mobile Surveillance for remote viewing from mobile devices with a 3GPP player installed.

The DCS-6110 includes a free version of the D-ViewCam 2.0 management software that can manage up to 32 network cameras, with e-mail alerts, recording schedules, and motion-triggered recording.

The camera is available now at an MSRP of $699.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Just saw the new .386 firmware in my router. Anyone update yet?
Sorry,I've looked through the forums and find anything. Is Merlin planning to release his FW for the AX86U?Thanks and soz once again.
Hi!I got hands of an older RT-N66u router that was running an (for me) unknown Merlin firmware version, and I was interested in flashing it into origi...
I am currently installing a new Asus AX88U at a clients office and its running the latest merlin firmware, 384.19.I am trying to configure the OpenVPN...
The recent move of ASUS Merlin AddOns into their own sub-forum has brought something to my attention. Namely, the extreme length of some threads. I've...

Don't Miss These

  • 1
  • 2
  • 3