Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Configuring X3

Now that we've got X3 flashed, you'll be greeted by X3's main configuration screen.

X3 BIOS Config Screen

Figure 3: X3 BIOS Config Screen

By default, the Xbox will use the static IP address which can cause problems since most consumer routers default to this as well. Navigate to the Network Settings menu (Settings > Network Setup) and enable DHCP or assign the Xbox a valid static IP address. Also take note of the FTP login and password, by default x3 and x3. It's safe to leave the defaults here, since XBMC also runs a FTP server that supersedes the BIOS.

Enabling DHCP

Figure 4: Enabling DHCP

Next, disable the hard drive lock to allow us to copy XBMC to the Xbox's hard drive.

Removing the Hard Drive Lock

Figure 5: Removing the Hard Drive Lock

Return to the main screen and "Cold Reboot" to have the new settings take effect.

Install XBMC

Now that the Xbox is up in our network, connect your favorite FTP utility to the Xbox's IP address (listed in the lower left on the main screen, in my case), create the directory "apps" on the E: drive and copy over the XBMC folder into E:\apps. (Note: X3's FTP server is pretty basic so fancy FTP clients may not work too well or at all. gFTP in linux works great as does FlashFXP in Windows.)

Installing XBMC

Figure 6: Installing XBMC
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
Author's Note: The original review can be found at my blog - Asus TUF Gaming AX3000 Review @ guys, I am back again with another Asus ...
Hi There,Update 2020/08/14 logs:1. Fix AiMesh page Tx/Rx 0 issue.2. Add ...
I am using an Asus AC3200 router with V384.13.8 firmware.I have purchased a number of Devolo powerline adapters but am having problems using them.The ...
Asuswrt-Merlin 384.19 is now available for all supported models, except for the RT-AX56U (no up-to-date GPL available for that model).The main changes...

Don't Miss These

  • 1
  • 2
  • 3