Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Inside Story

Figure 2 shows the opened phone, which has reduced component count from the F1000.

F1000G opened

Figure 2: F1000G opened
(click image to enlarge)

Figure 3 shows a closer view of the main board back, where you can see that the 11g radio module comes from SyChip, instead of Agere, which supplies the F1000's 11b radio.

Main board back

Figure 3: Main board back
(click image to enlarge)

The WLAN6100 module (PDF link) itself actually does support WPA2, WPA, WEP, 802.1x, LEAP and AES security, so we can hope that at some point UTStarcom will upgrade the phone to also support these more secure modes.

Maximum transmit power

Figure 4: Maximum transmit power

The WLAN6100's spec sheet lists "+15dBm RF power", but the FCC test report excerpt shown in Figure 4 shows that's only for 802.11b operation. 802.11g peak output power is about half that - around +11dBm / 14mW.

Main board front

Figure 4: Main board front
(click image to enlarge)

Figure 4 shows the board's front, where the mic, speaker, monochrome display and keypad are mounted.

Since the FCC certification is completed, I'd like to see Vonage set the right example and ship the F1000G instead of the F1000. While it won't currently solve the WEP insecurity problems, the F1000G would at least not force WLANs to slow to accomodate it like the F1000 will.

But so far there's no sign of who will be the first to make this small step toward a better VoWLAN solution available.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi There,Update 2020/09/11 386 rc2-5 (9.0.0.4_386_40018)https://drive.google.com/drive/folders/1Sqzva4uK7DTrp7oV93__LR6FZoDOckrN?usp=sharingChange lo...
Greetings fellas- I have read all the threads with the 86u hardware issue with the wireless channel and wanted some feedback and help from you guys if...
Hi,I am trying to stop undesired behaviour on my internal network and this means I want to stop the following items:- Unknown MAC addresses communicat...
Hello everyone, I am new here and apologise if I missed the answer to my question.I have a RT-AC88u with the firmeware 3.0.0.4.385_20631When I downloa...
Asuswrt-Merlin 384.19 is now available for all supported models, except for the RT-AX56U (no up-to-date GPL available for that model).The main changes...

Don't Miss These

  • 1
  • 2
  • 3