Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security How To

Introduction

Many routers now come with an integrated OpenVPN server to provide secure remote access to both router storage and LAN devices. We haven't been testing VPN performance in our reviews because, frankly, I dread messing with VPN. I usually get it working eventually, but typically burn a day in the trial-and-error process that is inevitably required.

So in the interest of saving you a day, I am doing a few articles that present both VPN performance test results and step-by-step setup instructions for getting a working OpenVPN tunnel between a Windows client and the router. This tunnel will support connection both to the router's shared storage and to client devices on the router LAN.

Since ASUS was the first to integrate OpenVPN, I'll start with them.

Setup

My test setup used Win 7 and Win 8.1 computers.

  • Windows 7: Lenovo X220i (Intel Core i3-2310M @ 2.1 GHz, 2 GB RAM) running Win 7 Home Premium SP1 64 bit
  • Windows 8.1: Acer AspireS7 (Intel Core i5-4200U @ 2.3 GHz, 8 GB RAM) running Win 8.1 64 bit

To eliminate internet connection variation, I used the test setup shown below. Note that the two computers are on different private subnets.

OpenVPN test setup

OpenVPN test setup

Steps

1) Check your shares
Before you start messing with VPN, you first need to check that your OS sharing permissions are properly set so that shares can be reached among LAN machines on both networks. This sometimes is tricky when mixing Win 7 and 8 devices.

I don't use Windows Homegroups, don't use password protected sharing and don't use Guest accounts. So in Win 8, disabling password protected sharing (Network and Sharing Center > Advanced Sharing Settings > All Networks) and adding access for Everyone in the share's security properties usually does the trick.

2) Configure your firewall
OS and anti-virus suite application firewalls are another thing that can mess you up. If you run one, you've probably already figured out the settings to not block file sharing traffic. Buf if you have any problems pinging a share across the VPN tunnel, temporarily disable the firewall to see if that's the problem.

3) Install the OpenVPN client
ASUS provides links for downloading Windows, MacOS, iOS and Android OpenVPN clients on the VPN Server tab as shown below. Each link takes you to an ASUS FAQ page that includes a downlink link for the proper app and instructions for installing and configuring it.

ASUS VPN Server tab

ASUS VPN Server tab

This OpenVPN FAQ provides a pretty accurate description of the Windows installation process. Don't bother to launch the app after you install it. It won't do much until you install an OpenVPN config file.

4) Create User(s)
Create users on the VPN Server General settings page in the Username and Password section as shown below. Please use a stronger password than the one I used. Your connection security depends on it! Be sure to Apply the settings.

ASUS VPN Create user

ASUS VPN Create user

More Stuff

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Running 384.5 on an AC87U and playing around with snmp monitoring. I was hoping to monitor both wifi interfaces/radios, 2.4 and 5 ghz. When I walk the...
I am in the process of fixing my existing network connections, mainly because I want to activate more Ethernet ports as kids are older and can be trus...
Hi I have just bought a new WD 3TB Passport portable hard drive to connect to my Asus RT-N66U.I have managed to get it connected via Samba in the Asus...
We have had some fun comparing CPU OpenSSL performance in the forum. Most recently in the Router thread. I summarized the discussion in a blog post he...
Is there a way to send an email when there is an admin login on the Merlin firmware? I'd also like to know where there is a failed login attempt on my...

Don't Miss These

  • 1
  • 2
  • 3