Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security How To

Installation

Updated 7/25/2006

Go ahead and download the SSL Explorer "Community" edition package from sourceforge.net and unzip the package to a suitable directory. On my machine I used C:Program Filessslexplorer-0.2.4. Then copy tools.jar from C:Program Filessslexplorer-0.2.4sslexplorerlib to C:Program FilesJAVAjre1.5.0_07lib folder.

Next, start up a command window (this can be accomplished by selecting Run from the START menu and typing cmd). Navigate to the SSL Explorer directory (cd C:Program Filessslexplorer-0.2.4) and type the following command to start the compile/install process: ant install.

The command window at this point should look similar to Figure 1.

Figure 1: Command line window after build completes

Figure 1: Command line window after build completes (click image to enlarge)

ANT will chug away for a few minutes compiling Java source files and then it will attempt to launch a Web browser pointed at special port (28080) on your machine. This special port is only used until you have set up the basic options for your install. You will configure your keystore and SSL certificate in this mode before placing the server into operation.

If you are installing SSL Explorer on a system with the Windows firewall enabled, then you will probably see a window similar to Figure 2 at least once.

Figure 2: Windows firewall message

Figure 2: Windows firewall message

Be sure and choose unblock so that you will be able to configure the application through your Web browser. If SSL Explorer was successful at launching the Web browser, then you should see a screen similar to Figure 3.

Figure 3: Select certificate type

Figure 3: Select certificate type (click image to enlarge)

If your computer did not bring up the Web browser automatically, then you should be able to open up a browser and connect to the setup page manually by using the following URL: http://127.0.0.1:28080.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I configured my Asus router to connect to my Bell HH3000 router in PPPoE. Like DNS I specified 8.8.8.8 and 8.8.4.4. Often times I have DNS errors, ...
Hey all, been a long time since I rapped at ya.I use bandwidth limiter a lot so it would be very nice to be able to script some gui actions.I have a s...
Hi All,First time posting, and I need some advise.Currently I have a Linksys EA9300 tri-band router. It hasn't been a bad router but it has its quirks...
Hi,My asus RT-AC87U router reboot several times per day. I'm trying to analyze the syslog but can't find something stange in it. Any advices where to ...
So wanted to share on how I mounted my AX11000Found this mount on amazon for a few bucksSent from my iPhone using Tapatalk

Don't Miss These

  • 1
  • 2
  • 3