Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

TRENDNet's two new indoor/outdoor "covert" network cameras are the bullet-shaped TV-IP318PI Indoor/Outdoor 8MP 4K H.265 WDR PoE IR Bullet Network Camera, and the domed TV-IP319PI Indoor/Outdoor 8MP 4K H.265 WDR PoE IR Dome Network Camera with a fixed pan/tilt with rotational lens. Both cameras support 4K resolution for high definition recording with H.265 compression, and smart IR LEDs that are invisible to human sight for night vision capability good up to 30 meters.

The "cover" design aspect is a lens design that masks the IR LEDs making the LEDs invisible to the human eye when they are enabled for night vision.

Housed in IP67 rated material, both cameras are suitable for indoor or outdoor use and are PoE enabled, opening several options for enhanced placement flexibility.

TRENDnet TV-IP319PI

TRENDnet TV-IP318PI and TV-IP319PI IP cameras

Other listed features for the TV-IP318PI and TV-IP319PI include 4K UHD video (3840 x 2160) at 20 fps, 120 dB WDR image balancing, and a Micro SD slot supporting up to 128 GB of storage.

Available now via TRENDnet’s online store and through authorized distributors and retailers, the TV-IP318PI and TV-IP319PI are both $299.99 MSRP.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

H guys! Want to block specific port, never do it. Just read the faq, but did't know is it right.Port is 10000 both protocols.SettingsOr I need to add ...
Hello all.I have a RT-AC68U and are wondering: How long time shall I expect my router getting updates, like any updates, from ASUS, Merlin, Tomato, DD...
Symptom: TP-Link AV2000 (TL-PA9020) causes some sort of packet storm if two cables are connected from switch to first unit and nothing at all is conne...
I updated a RT-AC1900P and a RT-AC86U to Merlin to 384.3 and I did a factory restore to both and I then applied the same exact setting to both routers...
This is partially a duplicate message however I cannot find my original post. Sorry about that.Using Merlin 38o.69.2 on an Asus RT-CD87R I cannot save...

Don't Miss These

  • 1
  • 2
  • 3