Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2015

CES logoThe HomePlug Alliance released AV2 news at CES 2015

The Alliance announced the first HomePlug AV2 Certified products and availability of the HomePlug AV2 Certification program for powerline home networking products.

Some of the key advancements in HomePlug AV2:

  • Ideal backbone for hybrid home networks that must evolve to carry large amounts of data for Ultra HD Video and IoT applications.
  • Support for MIMO with beamforming - Doubles rate coverage
  • Whole-home coverage with repeater functionality
  • Power save modes (Active, Standby and Idle)
  • Complete interoperability without degradation with HomePlug AV and HomePlug Green PHY devices
  • Enhanced support for Multiple Dwelling Unit (apartment) environments to maximize throughput of neighboring networks.

HomePlug AV2 profiles

HomePlug AV2 profiles

HomePlug Alliance Sponsor members Broadcom and Qualcomm Atheros are supporting the launch with products in the interoperability test bed and a demo in the HomePlug Alliance meeting room this week during CES 2015.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I've seen several threads here about people experiencing Link Down messages. I've confirmed that the issue is with my new Asus AC86U (which replaced a...
Hi. I purchased a used ac-5300. I had set it up it’s dual wan option with fall back selected. It worked fine for 2 days. Then on the 3rd day, I restar...
Not really sure how to describe this. I've been away for a couple of weeks, so nothing that I can think could/would have changed and I'm certain it wa...
On other stock firmware like Netgear and Linksys WRT, the network "map" would show whether a host was connected to main or guest or whatever. On OpenW...
After searching, I'm finding answers all over the board, and was hoping to help get some advice on how many devices (2.4 and 5GHz) that can connect to...

Don't Miss These

  • 1
  • 2
  • 3