Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Glenn Fleishman has a long piece over at Wi-Fi Networking News that expands on some of the issues I covered in my post of a few weeks ago. It also provides some new insight into some of the issues regarding 11n and its operation in the 5 GHz band.

Glenn gives props to Apple for its decision to not allow use of "wide channels", i.e. channel bonding or 40 MHz mode, in the 2.4 GHz band. It should also be noted, however, that Intel has done the same thing in its new draft 11n chipset. Buffalo Technology didn't go quite as far with its new dual-band gear, choosing only to default to 20 MHz mode in the 2.4 GHz band. It's still possible for a user to manually switch the Buffalo gear to channel-bonding mode, however.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

By the looks of it, the BCM43684 is WiFi 6 Certified!https://www.anandtech.com/show/14875/wifi-6-is-officially-here-certification-program-begins
Hello everyone,I'm looking to replace an older Linksys E1200v2 router with Freshtomato installed on it with a better router that provides higher throu...
"Today, we show that security controls put in place by device manufacturers are insufficient against attacks carried out by remote adversaries."‚Äč Loo...
Hi to all,I have an RT-AX88U router running the latest Merlin Firmware (384.13) with DDNS configured to my host (host..com) which has been in use for ...
Hi,I set it up using the PC as I was not able to connect using the Unifi Network App.As I tried using the App later on it say it was already paired to...

Don't Miss These

  • 1
  • 2
  • 3