Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

In Use - GUIP201

Configuring the GUIP201 was much easier. The device automatically grabs an IP from your DHCP server. The utility auto-launches with Windows and automatically brings up a window that shows the server (the GUIP201) and attached devices. You just highlight the device you want to connect to and click the Connect button.

If the device that you want to connect to is in use, the Connect button is greyed out and the device icon turns from green to red. But if you right-click on the device you can get details about it or request a disconnect. Figure 7 shows the disconnect request that pops up on the connected user's screen.

GUIP201 Disconnect request

Figure 7: GUIP201 Disconnect request

If the user clicks the No button, a message comes back to the disconnect requestor to let him or her know that the request has been denied and to try again later. If the user releases the device, a popup comes back to the requestor, saying that the device has been released. This is much better than the way that the Trendnet handles NetUSB mode.

The few tweaks that can be done to the GUIP201 are handled via a simple web interface (Figure 8).

GUIP201 web interface

Figure 7: GUIP201 web interface

Up to four devices can be handled by plugging a USB hub into the GUIP201. I had three handy for Figure 8, which also shows red icons to indicate that another user has connected to the devices.

GUIP201 three devices via hub

Figure 8: GUIP201 three devices via hub

Note that connected drives show up in My Computer, not in My Network Places when connected by the GUIP201 or the TE100-MP2U in NetUSB mode. I have circled the connected drives in Figure 9.

GUIP201 connected drives in My Computer

Figure 9: GUIP201 connected drives in My Computer

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Update 2020/10/29Android beta APK is readyASUS Router App: Guar...
Hello,I am using this wonderful Asuswrt-Merlin firmware for my RT-AC86U but having some issues with OpenVPN Server.Firmware Version:384.19Also using t...
I saw a suggestion in another thread about starting a new thread featuring the cooling solutions hit upon by each individual user. So, in that interes...
Using wrtmerlin 384.19 on an RT-AC68P with two AImesh nodes also running 384.19. Root node also running...Diversion v4.1.12 with pixelsrv-tls and Medi...
Hi all I'm a working employee. I've installed a wired security system in my house. Last week I went for a business meeting, and when I came back, the ...

Don't Miss These

  • 1
  • 2
  • 3