Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP today announced a four bay rackmount NAS targeted specifically at SMB and workgroup market segments.

The TS-410U uses a Marvell 800MHz CPU and 512 MB of DDRII RAM with four bays supporting 2.5" or 3.5" hot-swappable SATA hard drives for up to 8TB of total capacity. Other hardware features include Dual Gigabit LAN ports with failover and load-balancing, four USB 2.0 ports and two eSATA ports for storage expansion and attached backup.

The1U rackmount NAS can be configured for RAID 0/1/5/6/5+ spare, and JBOD with online RAID capacity expansion and online RAID level migration. It runs QNAP's AJAX-based V3 OS and supports QNAP's full feature set, which includes iSCSI targets, UPnP AV / DLNA and iTunes media services, BitTorrent / FTP, HTTP downloader and SMB/CIFS, AFP and NFS network file systems.

The TS-410U is available now at an MSRP of $699.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I saw these in several posts regarding firmware updates between 384.13 and 384.14 but I never saw an answer. I'm running 384.15 on an AC88 and these s...
Which router do folks recommend that would work well in mesh mode with the GT-AX11000 which I'm using as my main Router.Obviously I don't want to spen...
Didn't noticed this until after installing a few scripts through amtm (skynet and diversion) so I'm not sure if its something that was implemented or ...
Hi, per the subject, any ideas on how to fix? Let me know what you all need to help troubleshoot. View attachment 22251
Where do I put dnsmasq configs inside the the directory tree and what extension do I save them with?

Don't Miss These

  • 1
  • 2
  • 3