Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

This article is sponsored by Synology.

Synology Hybrid RAID

Synology Hybrid RAID

RAID (aka Redundant Array of Inexpensive Disks or Redundant Array of Independent Disks) is used by most multi-bay NASes to create storage volumes larger than the capacity of a single hard or solid state drive. RAID distributes data across drives in several ways that are identified by RAID levels numbers, i.e. 0, 1, 5,etc. Because each RAID level has its own combination of redundancy and performance, choosing a level can be a daunting task for the uninitiated.

So many NAS makers have developed automated RAID management systems as an alternative. Some, like NETGEAR's X-RAID, use proprietary methods, while others, such as Synology's Hybrid RAID (SHR) use standard Linux RAID management technology.

A key advantage of Synology's SHR is its ability to provide more usable storage when using disks of different capacities to create volumes. When different capacity disks are used with standard RAID, the smallest capacity drive limits usable space from larger drives. Synology provides a capacity calculator that allows you to explore capacity differences between SHR and classic RAID when using disks of different sizes to establish an array.

The gallery below shows the difference in available capacity when using different capacity disks to establish:

  • a 2-disk SHR array and a RAID 1 array
  • a 3-disk SHR array and a RAID 5 array
  • a 4-disk SHR array and a RAID 10 array
Comparing a 2-disk SHR and RAID 1 array of varying disk sizes, there is no significant capacity difference between SHR and RAID 1. However, in the other configurations, SHR capacity differences are significant at 2x and 3.5x RAID configurations.

SHR is designed for those of us who want simplicity but may not be experienced in RAID management. Establishing an SHR array only requires choosing between 1 or 2 disk redundancy and then three simple steps. The screenshots of the setup process in the gallery below are taken from Synology's DSM on-line tutorial.

You can expand an SHR array on-the-fly by replacing disks with larger disks, or by adding more disks to the array, both without manually reconfiguring the array. The graphic below shows a comparison between a 4-disk SHR array and a classic RAID array. With the SHR array, capacity is doubled by replacing only two disks and continues to expand as additional drives are swapped.

Volume expansion - SHR vs. RAID

Volume expansion - SHR vs. RAID

In contrast, a classic RAID array would require replacing all four disks before additional capacity is available. An SHR array can also be expanded by adding disks of equal or larger size than the current array's largest disk.

In summary, Synology's SHR is simple to set up and manage, and capacity can be expanded economically as need and budget allow. Whether you know a lot or a little about RAID, Synology's Hybrid RAID makes it a no-brainer! For more information about SHR, check Synology's Knowledge Base article.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I'm exchanging my old all-in-one R7000 for a better setup and am wondering if my choice of components is OK or if I made some obvious mistake. I...
HelloI have a problem with mi UPnP Media Server on Asus RT-AC58U.I enabled my server and I can see the drive connected through USB port to my router b...
My older Dlink DNS-323 in Raid 1 (2 WD 1.5tb drives) just seems slow these days, and it has always had pretty poor transfer speeds. So time to think a...
Time scheduling does not work anymore for some clients, however, it still works for others. It had been working fine for quite some time before that.T...
Anybody using HomeKit Secure Video? I want to buy a camera and try it as I have HomeKit running on my AppleTV 4K. My wife already has an iCloud storag...

Don't Miss These

  • 1
  • 2
  • 3