Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

Configuring ClarkConnect - Samba

Once your system is registered, we can set up the Samba share. To do this click on the Software tab and you should see Figure 7. If you installed more services than just Samba, you will have a list of those services along the left side of this web page. Click on Windows File Sharing to bring up the Samba configuration controls.

CC Windows File Sharing screen

Figure 7: CC Windows File Sharing screen (click to enlarge)

To get your server up and running you need to make five changes on this screen:

One: Click Start to turn on the CC NAS Samba server.

Two: Click To Auto to set Samba to start every time your CC NAS boots up.

Three: Set Workgroup to whatever your home LAN workgroup is. For example, this will be "WORKGROUP" if you have Windows XP and a default XP LAN setup. If you change the Workgroup name, click the Update button four lines below the workgroup name immediately. These Update buttons are frustratingly easy to miss in ClarkConnect. Whenever you change something with an Update button, hit Update ASAP.

Four: Disable the homes share. I assume you are not going to create users (for user authenticated log in) or use a domain in this project. We will be setting Samba for unrestricted log ins. So, homes shares for users are not needed because we are going to create a few 100% shared network drives.

Five: Delete the printers share.

Figure 8 illustrates each of these changes and where you click or type to make them.

CC Samba settings

Figure 8: CC Samba settings (click to enlarge)

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,I have an ASUS RT-AC68P. Today I went to set an inbound firewall rule which would enable port 3389 access from my office IP to my internal home...
I have had a Cable internet connection for years. The AC66U did just fine. Fiber optic internet became available and I just switched over. That meant ...
Hi,I have a RT-AC57U v2 for which i need to set a specific string for DHCP client option 60 (vendor id) because my ISP authentifies router based on th...
Hi,I have the R7800 and ive installed dd wrt, I would like to know if I need to clear the nvram sometimes and if I do that, Will i lose my configurati...
Hi there,I have an issue with my Asus DSL-AC68U.I built and flashed a bad image on my router and it's bricked now.I have access to serial port and wha...

Don't Miss These

  • 1
  • 2
  • 3