Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Features

Everyone seems to be asking what the difference is between D-Link's popular DNS-323 dual-drive BYOD NAS [reviewed] and the very similar DNS-321 that D-Link hasn't even bothered to officially announce. So let's take a quick look to clear things up.

First, D-Link says that the 321 is not replacing the 323, but is a "strategic" product intended to compete with lower cost dual-drive alternatives.

D-Link DNS-321 2-Bay Network Storage Enclosure

Figure 1: The D-Link DNS-321

Both are pretty much the same size, which is that of a smallish black toaster—without the bread slots. Figure 2 shows the plain, but attractive front panel, which uses the currently de rigueur blue LEDs for all indicators. The figure doesn't call out the LED at the bottom of the vertical strip, which flashes during startup and shutdown.


D-Link DNS-321 Front panel

Figure 2: Front panel

Figure 3 shows the rear panel, which reveals the first difference between the 321 and 323. There is no USB 2.0 port, which means no drive expansion or built-in print server. The Ethernet port, however, is 10/100/1000.

D-Link DNS-321 Rear panel

Figure 3: Rear panel

The bigger differences, however, lie inside the 321, which uses a completely different board than the 323. Figure 4 shows the 321's board while Figure 5 is the 323's.

D-Link DNS-321 main board
Click to enlarge image

Figure 4: Main board

Both use Marvell "Orion" processors, but the 321 uses an 88F5182-A2 C400 (400 MHz clock), which has the SATA interface built in. The 323 uses a Marvell 88F5181 (clocked at 500 MHz), which is combined with a Marvell 88X7042 PCIe to Serial ATA Controller chip.

DNS-323 main board
Click to enlarge image

Figure 5: DNS-323 main board

The 321's Ethernet comes from a Marvell 88E1118, while the 323 uses a Marvell 88E1111—not a significant difference. Both products have 64 MB of RAM soldered to their boards. But the 323 has only 8 MB of flash while the 321 has 16 MB.

A quick run through the web GUI shows equivalent features, except for the missing print server in the 321. This means that the 321 still has iTunes and UPnP AV media servers as well as FTP and DHCP servers.

What I didn't see is any indication of BitTorrent support in the Download Scheduler or jumbo frame controls in the LAN settings. Both features were added back in May to the DNS-323 via 1.05 firmware. A check with D-Link revealed that up to 9K jumbo frames are supported—automatically, apparently—but that the lack of BitTorrent download support is one of the reasons for the 321's lower price.

So are the missing USB port and BitTorrent download support worth saving $40 over? You might want to wait a day or so until testing is complete before making that decision.

Updated 7/21/2008: Read the full review.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

What's the consensus on whether to use Merlin or stock firmware for AI mesh client?main: 86uclient: 68u
Hey all.Suddenly I got a brand new problem:With my AC68U, hardware version A2, cannot anymore get online when I use "normal" setup."Normal" being with...
My router is saying the above new firmware is available, but I don't see it listed on the Asus website and there doesn't appear to be any release note...
ASUS ZenWiFi XT8 has landed Do note that it's not up for retail market as yet and please wait for respective region ASUS office to make the official a...
Hi all,i am currently facing a few issues trying to route a locally running OpenVPN Server through my VPN Client activated on my DSL-AC68U running gnu...

Don't Miss These

  • 1
  • 2
  • 3