Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Admin

The User Guide references a PLA Series Configuration Utility. But there is no CD in the box that contained only documentation and the utility wasn't found via Support searches for either PLA5405 or PLA Series Configuration Utility.

My experience has shown these utilities are of little use anyway. I've yet to find a powerline device that had any updated firmware to be installed. And the QoS configuration screens are not user friendly and have no useful documentation.

The only possible use is to check link rate, which again, I rarely find provides an accurate reflection of the actual throughput of a powerline connection.

Performance

I tested the PLA5405 using our standard powerline test procedure, with all results entered into the Powerline Performance Charts.

Since this is the only AV2-M1000 class device, I took the approach of comparing it to three products closest to it in the Powerline Charts, ZyXEL's PLA5206 (AV2-S750), TP-LINK's TL-PA6010 (AV2-S500) and ZyXEL's PLA5205 (AV2-S500).

The Downlink Throughput plot below clearly shows the PLA5405 having the highest throughput only in the best-case same-outlet Location A. The 5405's 333 Mbps is 25% higher than the next-best TP-LINK TL-PA6010 with 267 Mbps. But the plots show the 5405's advantage doesn't carry into the medium-range location C test, where it is beaten by the TP-LINK. And in worst-case Location E, all but the AV2-S500 class PLA5205 are about the same between 102 and 108 Mbps.

Downlink throughput comparison

Downlink throughput comparison

Uplink results show a similar pattern. The 5405 is best in Location A with 351 Mbps, but drops to next-to-last position in Location C and runs with the most of the pack in Location E.

Downlink throughput comparison

Downlink throughput comparison

The simultaneous up /downlink IxChariot plot for the PLA5405 shows uplink favored over downlink by almost 2 to 1. But there is cyclical variation and the two streams appear to be slowly converging. Note throughput totals almost 420 Mbps!

IxChariot simultaneous up / downlink

IxChariot simultaneous up / downlink

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I just got a CAPTCHA confirmation on my RT-AC87R logging in. I've never seen that before. Is this a security feature in 382.52230? I have been doing a...
I have a handful of devices that need to have reserved IPs due to their rather limited or non-existent ability to reconnect if their IP changes after ...
Just recently started with Zmodo NVR DHCP requests are coming through my AC86U 384.17,,,it just keeps flooding the router DHCP request/offer continuou...
Anybody running a Cisco RV260P router? It seems like an easy way to setup a small home multiple wireless system. If I did not like layer 3 switches so...
Hey all,I've got my AC88U with the latest merlin firmware on it. Over the past couple of weeks, I've noticed random crashes and I can't put my finger ...

Don't Miss These

  • 1
  • 2
  • 3