Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Setup and Configuration

Like the SRW2008, the SLM2008 lacks either a printed quick start guide or a discovery utility. All of the configuration information is included on the supplied CD. According to the manual, the switch has a default IP address of 192.168.1.254. The guide does not provide instructions for changing your computer’s IP addressing scheme to a 192.168.1.0/24 network to perform initial configuration. However, if you know enough to buy a "smart" switch, you will probably know how to do that!

Home Page
Click to enlarge image

Figure 2: Home Page of the SLM2008

Once you log into the browser-based management console, you’ll find that the user interface is quite similar to other Linksys products, with ten menu tabs arranged horizontally across the top. I did find it annoying that on many pages, I had to scroll down in order to find the "save changes" icon at the bottom of the screen. The fixed window size seemed arbitrary, considering that I had additional screen real estate available that could have easily accommodated all of the fields on the Linksys page.

Figure 3 shows the corresponding home page for the SRW2008 managed switch. Though the SLM2008 was introduced after the SRW2008, a comparison between the home pages indicates that the SLM’s UI is a step backwards.

SRW2008 Home page
Click to enlarge image

Figure 3: Home page for the SRW2008 managed switch

My chief complaint about the UI on the SLM2008 is the lack of online help. On the SRW2008, each screen features online help in a scroll window along the right-hand side of the screen. While similar descriptions of functions appear in the user guide for the SLM2008, people often lose CDs. In addition, context-sensitive help speeds configuration. For a product aimed at less technical consumers, the exclusion of help in the UI seems like a real oversight.

My complaint about the UI aside, the SLM2008 is a very capable switch. It includes many of the features of the fully managed SRW2008, but in most cases, there are fewer configuration options. It’s fair to say that the SLM2008 is a subset of its fully managed sibling.

Under the Port menu, you find that the SLM2008 supports static link aggregation. It supports two LAGs (link aggregation groups), and each LAG can contain up to eight ports. 

Port Menu
Click to enlarge image

Figure 4: SLM2008 Port Menu

The VLAN menu lets you create multiple VLANs. Each port can be assigned to a VLAN. You can enable the ingress filter and set acceptable frame type to either ALL or Tagged Only. Of course, the fully managed SRW2008 gives you many more configuration options, including GVRP (Group VLAN Registration Protocol), which allows for automatic distribution of VLAN membership information among VLAN-aware bridges.

VLAN Menu
Click to enlarge image

Figure 5: SLM2008 VLAN Menu

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Ex user of DDWRT so pardon my ignorance but is there an out of the box internal LAN/wifi speedtest between two AiMesh routers for Merlin.Not intereste...
Hi,My RT-AC86U is running firmware Version:384.15 and i have installed skynet and diverion.I just logged in to check something and saw 100% cpu load. ...
HiI have a AiMesh setup:Ac86: router 3.0.0.4.384_81351-gcb63868Ac68u: node 3.0.0.4.385_20252-ga052d4cI am running with wireless backhaul. I have disab...
I live in New York State where “Spectrum” took over our failing Time Warner service. We had a phone company that, “by the way”, provided a 7 Mbps Inte...
Would it be possible to make a Cloudflare Warp (Cloudflare VPN service) plugin work on the Asus router? I have seen people run it on Mac, Windows, and...

Don't Miss These

  • 1
  • 2
  • 3