Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Introduction

XINCOM Twin WAN Router

XINCOM Twin WAN Router
Summary 4 port dual Ethernet WAN router with load balancing and auto-failover capability
Update None
Pros • Load balancing and auto-failover seems to work well
• Large feature set
• Good throughput
Cons • No logging
• Firmware still evolving
• Documentation needs to better explain unique features

When I was first approached by Xincom to review its Twin WAN router, I asked them to differentiate it from Hawking's FR24 that I reviewed almost a year ago, and which is widely available for about a third of Xincom's price. Xincom's response was that they compare it more to Nexland's pro800Turbo, which can still be found for under $250. (Symantec acquired Nexland back in May of this year and has renamed the pro800Turbo the Symantec Firewall/VPN 200 and doubled its price to about $900.)

Reality lies somewhere in between. The 402's hardware is essentially the same ARM-7 based design as the pro800Turbo's, minus the pro800's backup serial port and substituting a Kendin 8995 5 port 10/100 switch+PHY chip for the Broadcom 5317 8 port switch+PHY found in the pro800Turbo.

The Hawking, on the other hand, uses a more highly integrated design based on the ADMtek 5106 / Conexant CX84200 Network processor, which probably allows Hawking to have such aggressive pricing. The Hawking's four 10/100 LAN ports also are auto MDI/MDI-X, which eliminates the need for an Uplink port or Normal/Uplink switch for port expansion, while the Xincom just skips uplink capability. The Hawking's twin WAN ports are also 10/100 vs. the Xincom's 10BaseT, but given the sub-10Mbps speed of both routers, the Hawking has no real edge here.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Running OpenVPN server on RT-AC5300 with latest merlin image.I can connect and access the LAN on the AC-5300 fine, I have another LAN segment on a swi...
I am struggling with arranging policy rules to my router to route the traffic.All source ips are 0.0.0.0and I have a list of around 90 ips that need t...
I`ve tried several methods to reconnect WAN (4G USB stick) through SSH but none of them worked. Is there a way (command) to reconnect WAN without rebo...
I have an 86U an 68U with Merlin 384.13. The 68U is setup in AP mode and is connected via ethernet to the 86U. I want to give AIMesh a try - main reas...
So i got a new Home Gateway installed as part of the 1Gbps upgrade i did with my ISP. Works like a charm, getting around 850/40 out of the 1000/40 sub...

Don't Miss These

  • 1
  • 2
  • 3