Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

D-Link logoD-Link's new dual-port 10GbE adapter is aimed at server applications.

The D-Link DXE-820T Dual Port 10GBASE-T RJ-45 PCI Express Adapter is a dual-port copper 10GbE adapter capable of supporting full duplex 10 Gbps throughput simultaneously on both ports.

The single-height adapter requires a PCI Express v2.0 x8/x16 slot and supports 10 GbE connection up to 100m with Cat C6A or higher UTP cable or 50m with Cat 6 cable. The card also supports 1 Gbps throughput at distances up to 100m with Cat 5 or higher UTP cable.

Features supported include NIC partitioning, up to 9K jumbo frames, 802.1Q VLAN tagging, 802.3x flow control, 802.3ad teaming, SNMP management and TCP/UDP checksum offloading. Maximum power consumption is around 23 W.

Drivers are available for Windows Server 2008 (x86, x64)/2008 R2 (x64), Windows Server 2012, RHEL 6.4/6.5 (x64), RHEL 5.9 (x64), SLES 11.2/11.3 (x64) and Solaris 11/11.1

D-Link DXE-820T

D-Link DXE-820T

The DXE-820T is shipping now and lists for $529.99.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, my RT-AC86U is up and happily running Firmware Version 384.6. I am connected with BT (UK) via PPPOE which supports baby jumbo frames (MTU 1508) vi...
Is it possible to set up a network that will allow me to have two completely different connections out of 1 modem?1st connection will be used without ...
Hello,I use RT-N66U. if I flash with the merlin firmware 380.70 (mode router) my wifi 5ghz disappear after a few hours. (2.4ghz OK).If if I flash with...
For the client list, the router defaults to showing the manufacturer of each client's network interface. But this makes it very hard to tell one devic...
So I have been using a 3 disk BT Wholehome (BTWH) system for a year or so. It has been mostly rock solid, my house is a 4 bed detached over 3 floors b...

Don't Miss These

  • 1
  • 2
  • 3