Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

The GS724TPS and GS748TPS ProSafe Advanced Gigabit Smart Switches target small to medium businesses needing full Gigabit switching and PoE support. Both products support up to 30W on each of the first four switch ports and are draft IEEE802.3at draft compliant.

Up to six of each switch can be stacked using two HDMI ports that provide 20 Gbps of bandwidth. Both redundancy and hot-swap are supported for stacking and the GS724TPS and GS748TPS can be stacked with GS7xxTS switches (GS724TS and GS748TS).

Features include access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting, web and SNMP (v1, 2 and 3) management.

The GS724TPS and the GS748TPS will be available next month at MSRPs of $899.99 and $1,699.99, respectively.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

By the looks of it, the BCM43684 is WiFi 6 Certified!https://www.anandtech.com/show/14875/wifi-6-is-officially-here-certification-program-begins
Hello everyone,I'm looking to replace an older Linksys E1200v2 router with Freshtomato installed on it with a better router that provides higher throu...
"Today, we show that security controls put in place by device manufacturers are insufficient against attacks carried out by remote adversaries."‚Äč Loo...
Hi to all,I have an RT-AX88U router running the latest Merlin Firmware (384.13) with DDNS configured to my host (host..com) which has been in use for ...
Hi,I set it up using the PC as I was not able to connect using the Unifi Network App.As I tried using the App later on it say it was already paired to...

Don't Miss These

  • 1
  • 2
  • 3