Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

The NETGEAR MCAB1001 uses existing home coax wiring to extend Ethernet networks. Maximum raw throughput is specified at 270 Mbps, with usable throughput below 100 Mbps. NETGEAR says the bridge is designed to carry "multiple simultaneous HD video streams and online gaming applications".

The MoCA 1.0 certified bridge bridge works with up to 300 feet of standard coax but can't be used with satellite TV installations or without properly bypassed RF amplifiers. It is based on Entropic’s EN2210 chipset, which includes encryption and automatic QoS of networked data.

The kit includes two adapters with two F-type RF and one 10/100 Ethernet connectors, coax and Ethernet cables and AC power adapters. Street pricing will be $180 - $200 when the products hit retailers in Q1 2009.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, I have Asus U66 WRT with Merlin upgrade on it and I am trying to configure OPENVPN server on it so I can see devices behind router from anywhere. ...
Is it possible to set up a network that will allow me to have two completely different connections out of 1 modem?1st connection will be used without ...
Hi, my RT-AC86U is up and happily running Firmware Version 384.6. I am connected with BT (UK) via PPPOE which supports baby jumbo frames (MTU 1508) vi...
Hello,I use RT-N66U. if I flash with the merlin firmware 380.70 (mode router) my wifi 5ghz disappear after a few hours. (2.4ghz OK).If if I flash with...
For the client list, the router defaults to showing the manufacturer of each client's network interface. But this makes it very hard to tell one devic...

Don't Miss These

  • 1
  • 2
  • 3