Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Features

Closing Thoughts

So you're seeing low throughput in your mixed gigabit / 100 Mbps LAN, you have a few options to fix it:

  •  Disable Flow Control in the NICs - This is the lowest-cost approach and should be tried first. But your adapter might not allow you to futz with Flow Control. I took a survey of the Ethernet adapters in my various machines and found that only the Intel PRO/1000 MT Desktop and internal 3C920 (3C905C-TX compatible) Integrated adapter had Flow Control properties.

    Two notebooks that had Realtek RTL8139/810x family integrated 10/100 NICs did not show Flow Control properties, even though the chipset does support Flow Control. If my experiments are accurate, however, you only need to worry about diabling flow control in the gigabit adapters anyway.

  •  Disable Flow Control at the switch - It's unlikely you would have to resort to this, since you should be able to disable Flow Control in your gigabit NICs. But if you can't, then you need to get yourself a "smart" gigabit switch that has Flow Control enable/disable. You can't do this by changing to a different unmanaged gigabit switch, since all of them support 802.3x flow control, which can't be disabled.

    But moving up to a "smart" switch might not be as painful a hit in the wallet as you'd think. For example, the unmanaged Linksys SD2008 can be found for as little as $71, while its "smart" SLM2008 cousin is around $100. And in addition to Flow Control, you get other goodies such as VLANs, bandwidth control, port mirroring, link aggregation and more.

  •  Upgrade to all gigabit NICs - This is a good solution if you have desktop machines, since PCI NICs can be had for as little as $12. But if your notebooks have only 10/100 Ethernet ports, or you have devices with embedded NICs such as media players or NASes, you won't be able to upgrade.

By the way, you may need to hunt around for your NIC's Flow Control setting. I finally managed to find the PRO/1000 MT Desktop adapter's setting buried as shown in Figure 4.

Flow Control option in Intel PRO/1000 MT Desktop adapter
Click to enlarge image

Figure 4: Flow Control option in Intel PRO/1000 MT Desktop adapter

By contrast, the 100 Mbps NIC's Flow Control setting was one of the top-level settings in the adapter's Advanced Network Properties.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi !As I'm addicted to home automation, I have a lot of wifi connected items at home.I changed my original router (my Internet provider's one) because...
helloi have an rt ac 5300 and the latest great firm from merlin.i want to spent holiday in ägypt and i want to driver open vpn over the intern shh ser...
Hi all, long time lurker first time poster.I've recently upgraded my home network with an RT-AX88 and RT-AX92u to improve my coverage, although I have...
Hello,I own a Qnap TS-212P with 2 hard disks configured as a Raid1. I use it to store my music, all my CDs.The problem is that this NAS decided to som...
In my RT-AC86U network map, one device - a QNAP NAS - has very strange information. First, the device comes and goes from the display even though it i...

Don't Miss These

  • 1
  • 2
  • 3