Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Basics

Introduction

The Wi-Fi Alliance and IEEE 802.11 Task Group i have finally heard the voice of the marketplace.

I'm not sure whether the Halloween release of the announcement of a security solution called Wi-Fi Protected Access (WPA) was an inside joke or what. But I'm glad that someone finally came to their senses and realized that if they had waited the additional one to two years that the IEEE said it was going to take, that the marketplace was either going to decide for them, or create a fragmentation that would take years (if ever) to pull back together.

WPA is a subset of the IEEE 802.11i draft standard and is designed to be forward-compatible with 802.11i when it is finally published. The Q&A (PDF format) on the Wi-Fi Alliance's website says that WPA was created when "several members of the Wi-Fi Alliance teamed up with members of the IEEE 802.11i task group". Whether these folks jumped at the chance or had to be pushed is covered in the next section. But no matter how messy the birthing process, WPA seems to be a pretty good improvement over the present sorry state of WLAN security by providing improved encryption and simple, but robust, user authentication, that even home wireless networkers will be able to use.

Although the Wi-Fi Alliance is careful to point out that WPA isn't a standard, but instead a "specification of standards-based, interoperable security enhancements", it looks like it might as well be one. WLAN equipment vendors are lining up behind the spec with press releases issued by Intersil, Agere, Atheros, Funk Software, and Atmel concurrent with the Wi-Fi Alliance release.

But where did WPA come from? Any why now?

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

YazFi v4.1.4 Updated 2020-08-16 Feature expansion of guest WiFi networks on AsusWRT-Merlin, including, but not limited to:* Dedicated VPN WiFi netw...
I live in Canada so the only channel options available are 36 to 48, and 149 to 165. This knocks out any option to be able to use 160MHz and get full ...
I have been running into an intermittent problem on multiple Asus Routers, all running Asus Merlin Ver 384.17. About once every couple of weeks, the r...
https://fccid.io/MSQ-RTAXI600
v2.5.1 Updated 2020-05-10 Run an NTP server for your network. Graphs available for NTP accuracy on the Addons page of the WebUI.Inspired by kvic's p...

Don't Miss These

  • 1
  • 2
  • 3